-
In the flow properties, add 3 objects to
the model, Part1, Part2, and Part Container. Select the Display
Object Values in the Object definition interface.
-
Select the “PartContainer” object by
clicking on the number 4, then click on Object Components.
-
Add Part1 and Part2 to the container,
Define 1 item count per part. This operation creates the
definition of the Part Container to contain 1 Part1 and 1 Part2.
-
Create 2 start processes, the first creates
Part1, the second creates Part2
-
Create a generic process and name it
“Assemble”. Create an End process and connect the flow as
follows;
-
Start (Part1) to Assemble;
-
Start (Part2) to Assemble;
-
Assemble to End.
-
Open the properties of the Assemble process
and click on the advance button to open the advanced properties.
-
Select Line 5 in Advanced Settings, and
open the Assembly/Disassembly interface.
-
Enable the object assembly by checking the
“Enable object assembly …” box.
-
Select the Batch and Create Object columns
for Part Container to enable the assembly operation.
-
Close and run the simulation
